Quote:
Originally Posted by jeff5may
I'd just leave the txv superheat alone. You don't want to feed your compressor foaming fizz. With less than about 6 or 8 degrees superheat, that's what will happen unless you have a suction line accumulator.
|
I do have one on hand actually , but I believe these rotary compressors have one built onto them from the factory. I don’t think I’ll mess with the txv as per your guidance. Getting the ports on the compressor hot enough to make solder stick to them has proven quite difficult. It is the only thing holding me back currently . Might have to upgrade to an oxy-acetelyne torch.