EcoRenovator - View Single Post

Xringer · 05-17-11, 10:17 PM

Hey Nigel, that brazing job on the 3-into-1 is amazing.
It seems like the filler has to be filling some really large gaps between the cluster of tubes.

What equipment did you use to make those connections and what kind filler metal was used?

I have a thread about brazing already going at:
http://ecorenovator.org/forum/tools/...html#post13527

If, you have time to donate some of your expertise those of us interested,
some of us might want to copy your work.

Thanks,
Rich

Soldered many a pipe & cable, but never Brazed..

05-17-11, 10:17 PM	#27
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	Hey Nigel, that brazing job on the 3-into-1 is amazing. It seems like the filler has to be filling some really large gaps between the cluster of tubes. What equipment did you use to make those connections and what kind filler metal was used? I have a thread about brazing already going at: http://ecorenovator.org/forum/tools/...html#post13527 If, you have time to donate some of your expertise those of us interested, some of us might want to copy your work. Thanks, Rich Soldered many a pipe & cable, but never Brazed..