Quote:
Originally Posted by Xringer
I believe that I should add some little 10 or 15mm spacers between the foil layers and the steel. The spacers need to be made of a material that has a very Slow rate of conductance heat transfer. And in keeping with the Code of the DIYer, they must be cheap, very cheap.
|
I have seen a material, I'm not sure what it is called, but it is a white net made out of closed cell foam. It is pretty thin, maybe 3/16" thick.
I have seen it used as a packing material for fruit and fragile ceramic ware.
I was thinking it would make a dandy standoff for the reflectix-type stuff to reduce radiated heat in walls & floors.
You could probably even use fish net, it's contact area would be really tiny.
-AC_Hacker