View Single Post
Old 02-04-20, 01:07 AM   #1
Acuario
Apprentice EcoRenovator
 
Join Date: May 2011
Location: Tortosa, Spain
Posts: 221
Thanks: 2
Thanked 81 Times in 46 Posts
Default All year greenhouse V2.0

After the V1.0 disaster here we go again..
I was given a polytunnel a couple of years ago, brand new unused. I'm going to try with this for now however a local glazing company have just offered me some windows that were left over from some previous jobs so in the not too distant future I'll do a serious upgrade to a fixed structure that will hopefully not be prone to wind damage.

Anyway, for now it's the poly tunnel plus some extra ropes and concrete blocks to hopefully hold it down.

The controller stuff..
Since the last greenhouse controller I made a radical shift away from PIC processors to Arduino and then ESP8266 which has built in WiFi. So a completely re-designed and re-written controller was in order.

I've used a couple of environmental sensors for light monitoring and temperature/humidity (and for interest atmospheric pressure) with everything now displayed on a web browser in my office. From here I can monitor and control the heating and lighting. Later I'll add watering and temperature control but not until the fixed structure is built.

The poly tunnel. The green covering is to both add extra strength and for shading.


The plant stands are simply concrete blocks and old pallets.





The environment sensors.


The main status display

Attached Images
     
Acuario is offline   Reply With Quote
The Following 2 Users Say Thank You to Acuario For This Useful Post:
Daox (02-05-20), YardMan (04-08-21)