EcoRenovator - View Single Post

Xringer · 09-22-12, 01:35 PM

I'm getting five of the EDV300 units to place inside of storage cabinets and lockers down in the basement,
where I keep Ham radio equipment and other gear that I don't want exposed to too much moisture.

My basement is always damp, and I've had problems with rust for years.
I use spray lube on my Chinese machine shop tools, and they still get surface rust.

I'm hoping that rust process might slow down a little with the AirTap running..
But I've already noticed the condensate isn't being absorbed into the
bottom of the sump very fast. Some of it is recycling back into the basement air!

09-22-12, 01:35 PM	#3
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	I'm getting five of the EDV300 units to place inside of storage cabinets and lockers down in the basement, where I keep Ham radio equipment and other gear that I don't want exposed to too much moisture. My basement is always damp, and I've had problems with rust for years. I use spray lube on my Chinese machine shop tools, and they still get surface rust. I'm hoping that rust process might slow down a little with the AirTap running.. But I've already noticed the condensate isn't being absorbed into the bottom of the sump very fast. Some of it is recycling back into the basement air! __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..