EcoRenovator - View Single Post

cmroseberry · 05-20-10, 05:27 PM

Datasheet for WS pool heating system:

Nominal Heating Rate: 23,000 BTU/hr. from 1300 cubic feet per minute of 110° F attic air with 4 gallons per minute of 80° F entering water.

Height: 9 1/2 inches
Width: 30 inches
Length: 30 inches
Weight: 32 pounds (not including fan assembly)

Units can be readily disassembled into three main components to ease carrying onto roof.

Materials:
Water coils consisting of copper tubes expanded into aluminum fins.
Sheet metal parts consisting of 20 gauge or thicker steel, either galvanized or powder-coated.
Aluminum spacers and screen supports.

Features protective screen surrounding coils to prevent hail damage to fins.

Plumbing connections: ½” outside diameter copper tubes with beaded upsets (ridges) to retain ½” inside diameter hose secured with hose clamps.

Heat exchanger coils tested to 320 psi at factory.

Mounting brackets will attach to attic fan tubes 10” to 18” in diameter.

Made in the USA. Patent Pending

05-20-10, 05:27 PM	#2
cmroseberry Lurking Renovator Join Date: May 2010 Location: Garland, Texas Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	Datasheet for WS pool heating system: Nominal Heating Rate: 23,000 BTU/hr. from 1300 cubic feet per minute of 110° F attic air with 4 gallons per minute of 80° F entering water. Height: 9 1/2 inches Width: 30 inches Length: 30 inches Weight: 32 pounds (not including fan assembly) Units can be readily disassembled into three main components to ease carrying onto roof. Materials: Water coils consisting of copper tubes expanded into aluminum fins. Sheet metal parts consisting of 20 gauge or thicker steel, either galvanized or powder-coated. Aluminum spacers and screen supports. Features protective screen surrounding coils to prevent hail damage to fins. Plumbing connections: ½” outside diameter copper tubes with beaded upsets (ridges) to retain ½” inside diameter hose secured with hose clamps. Heat exchanger coils tested to 320 psi at factory. Mounting brackets will attach to attic fan tubes 10” to 18” in diameter. Made in the USA. Patent Pending Last edited by cmroseberry; 06-05-10 at 08:56 AM.. Reason: I don't want search engines to pick-up this post until I have more complete info on my own site