Quote:
Originally Posted by jdrimm
I'm a journeyman machinist by trade. The Ecello is a nice heavy duty machine, emphasis on the heavy! To that point, please don't put it on wheels. I know the mobility is attractive, but the mill needs to be very accurately leveled to run right. I use a master precision level, accurate to .0002" in 10". like this: https://www.amazon.com/findmall-Prof...xpY2s9dHJ1ZQ==
If you put it on wheels, it will twist as you move it, and you will find it impossible to get a square, parallel cut.
That mill can do a huge amount of work, and you are in for many hours of fun learning to use it!
|
This forum is all about people in the know helping others.
Thanks for the advice. I did not put it on wheels, and I ordered the level you recommended to get it level.
__________________
Current project Aquaponics system , Passive Solar Greenhouse build
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Last edited by pinballlooking; 12-06-21 at 03:27 PM..
|