EcoRenovator - View Single Post

Xringer · 04-19-12, 07:10 PM

Same problem at 48V.. I set my PWM Morning Star for manual “equalize” mode.
I don't won't it running during a power failure, just when I really need the juice!

I find it kinda funny that inverter makers set up their over-voltage protection circuits
so low, that you have a hard time changing the battery from solar..

AND, even worse they set up the low-battery voltage Shut down to voltages so low,
it's almost sure to damage your battery..

04-19-12, 07:10 PM	#7
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	Same problem at 48V.. I set my PWM Morning Star for manual “equalize” mode. I don't won't it running during a power failure, just when I really need the juice! I find it kinda funny that inverter makers set up their over-voltage protection circuits so low, that you have a hard time changing the battery from solar.. AND, even worse they set up the low-battery voltage Shut down to voltages so low, it's almost sure to damage your battery.. __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..