Parts needed:
1. Well with pump
2. Radiator of some kind
3. Plumbing
4. Blower
5. Thermostat
How to:
Connect the blower to the radiator to make air move through it at will. If ductwork is employed, seal all air leaks. Plumb the well to feed the radiator on command. Plumb the radiator to dump waste water from the well, and to drain condensation. Connect the thermostat to control the well pump and the blower so they operate only when cooling is called for. Commission and adjust the rig, sit back and enjoy the comfort.
The End (Experiment #1)
Good luck- take pics for us please!
|