EcoRenovator - View Single Post

pinballlooking · 06-30-18, 01:25 PM

The support beam is modified to have the 12 foot clearance.
I used 2 x 10 on both sides then two 2 x 6's across for the support.
Here is a before and after picture.

We have both post standing up now it is time for the install.

The right post is where it needs to be. We used my drill winch to set the post up. The cherry picker helped to.

06-30-18, 01:25 PM	#13
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	The support beam is modified to have the 12 foot clearance. I used 2 x 10 on both sides then two 2 x 6's across for the support. Here is a before and after picture. We have both post standing up now it is time for the install. The right post is where it needs to be. We used my drill winch to set the post up. The cherry picker helped to. Attached Images __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.