It's working!
That was easy.. It's working okay. I get a reading on Analog Input #1,
and multiply it by 37.. To get a rough RH value..
Right now, it's showing 161, which is 1.61 volts. x37 = 59.57% RH.. Approximately..
When I do the programming, I'll just use voltage, and skip the x37.
I'll use 1.65 volts as the trigger (using X10) to turn on a dehumidifier device.
And around 1.00 volt to turn off the dehumidifier device.
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
|