View Single Post
Old 05-17-11, 10:13 PM   #2
dh1
Helper EcoRenovator
 
Join Date: May 2011
Location: Ont. Canada
Posts: 99
Thanks: 14
Thanked 11 Times in 9 Posts
Default Motor

The motor, I have a ADC FBI 4001A but was unable to use it as I couldn't figure out haw to connect the motor to the trany or where to put 10 batteries.
So I ended up using a ADC 140-07-4001, 2hp continuous, 10hp peak, 36 volt motor. 45amp cont, 275amp max, 5.58 dia, 29lbs.
The tag is unreadable but I'm pretty sure this is what it is, paid $40. at a flea market for it.
A bracket was made out of 1/4" steel plate and the motor mounted in a spot where it could be hooked to the trany with a v belt using the original tensioner.
Also the factory lift was retained so that it could be used for attachments.
Mounting the motor like this, the Vari-Drive feature is eliminated, but the control handle for it still works the parking brake. Located on the right hand side of tractor.
Attached Images
     

Last edited by dh1; 05-17-11 at 10:42 PM..
dh1 is offline   Reply With Quote