EcoRenovator - View Single Post - EcoRider

Daox · 09-07-10, 05:53 PM

The new motor has arrived. Despite being packaged horribly. Tip to future motor shippers out there, DONT USE PEANUTS WHEN THE THING YOU'RE SENDING HAS TONS OF SLOTS IN IT (or put a bag around the part). *sigh*

So, the first thing I had to do was take it apart and vacuum it all out. I'm not sure I have it all. Probably tomorrow I'll be taking it to a friend's house and he is going to inspect the brushes for me. So, we'll have to take it apart then. We'll clean it out more if need be then.

Overall shot of the motor. As you can probably tell, this motor is a fair amount shorter than my first motor, but it is 1 inch wider.

09-07-10, 05:53 PM	#197
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	The new motor has arrived. Despite being packaged horribly. Tip to future motor shippers out there, DONT USE PEANUTS WHEN THE THING YOU'RE SENDING HAS TONS OF SLOTS IN IT (or put a bag around the part). sigh So, the first thing I had to do was take it apart and vacuum it all out. I'm not sure I have it all. Probably tomorrow I'll be taking it to a friend's house and he is going to inspect the brushes for me. So, we'll have to take it apart then. We'll clean it out more if need be then. Overall shot of the motor. As you can probably tell, this motor is a fair amount shorter than my first motor, but it is 1 inch wider. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.