View Single Post
Old 04-10-14, 03:18 PM   #10
ecomodded
Supreme EcoRenovator
 
Join Date: Sep 2012
Location: Vancouver Island,Canada.
Posts: 1,036
Thanks: 116
Thanked 100 Times in 87 Posts
Default

I think if you use a multimeter on amp setting you can read the amps the panels are putting out then x that by the volts , which will give you the watts.

are you using a dc watt meter
is the battery charging or fully charged
try drawing power to see if you get a reading and last but most important is the watt meter wired correctly, and the right buttons pressed..

Last edited by ecomodded; 04-10-14 at 03:29 PM..
ecomodded is offline   Reply With Quote
The Following User Says Thank You to ecomodded For This Useful Post:
bte52 (04-10-14)