View Single Post
Old 01-15-20, 04:37 PM   #8
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

I took another look at the snowblower today. I pulled the float and valve out. It was physically stuck in place and I had to yank it out with a pliers. It was froze shut. After cleaning it up I gave it another quick go to no avail (not too surprised).





Next I removed the carb from the engine. It seems pretty gummed up. The choke and throttle both turn with a decent amount of effort.





Right now, the whole thing is sitting in this carb cleaner bath. I've used it in the past with pretty good results. I usually let it sit overnight.

Attached Images
   
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote