EcoRenovator - View Single Post

pinballlooking · 06-18-19, 03:08 PM

I would like to add an air dryer to my compressor. Plasma cutters need dry air to not go through consumables more often than necessary.
Harbor freight has one but it is $400
https://www.harborfreight.com/compre...yer-40211.html

I have a Aquarium Chiller could I use this to as a air dryer?
They seem to do similar things.

Any suggestions on how to make this work or if this would work are welcome.
I would love to save $400.

The HF air Dryer is 1/4 Hp my chiller is 1/4 HP also.

Another option would be using this to cool off the air. I had this in my greenhouse but don't use it anymore. It would be a lot cheaper to run.

06-18-19, 03:08 PM	#1
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	DIY Refrigerated Air Dryer I would like to add an air dryer to my compressor. Plasma cutters need dry air to not go through consumables more often than necessary. Harbor freight has one but it is $400 https://www.harborfreight.com/compre...yer-40211.html I have a Aquarium Chiller could I use this to as a air dryer? They seem to do similar things. Any suggestions on how to make this work or if this would work are welcome. I would love to save $400. The HF air Dryer is 1/4 Hp my chiller is 1/4 HP also. Another option would be using this to cool off the air. I had this in my greenhouse but don't use it anymore. It would be a lot cheaper to run. Attached Images __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 06-18-19 at 04:16 PM..