Looking again at the picture. It has to be leaking oil from the seal on the pulley side.
In the manual it just shows the seal and the cover together.
The real seal had the right part number.
This is the right seal
My intercoolers were caked solid with dirt and oil. That oil had to come from somewhere. It was not expensive so by some slim chance it is not leaking then I will have the seal on hand.
__________________
Current project Aquaponics system , Passive Solar Greenhouse build
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Last edited by pinballlooking; 03-22-21 at 04:18 PM..
|