View Single Post
Old 01-21-18, 09:28 PM   #1
Lex Parsimoniae
Xringer's Avatar
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,875
Thanks: 106
Thanked 245 Times in 225 Posts
Default SkyGenius Wireless Light Switch Kit

Interesting little light switch. Installed one in the basement and it works fine.


Wireless Light Switch Kit ($29.99) ($9.85)

I added some 4 foot LED light strips above my lathe and the dryer (in the basement).
Then I realized that my wife couldn't hardly reach the light switch.

Since I normally use the over-head switch, I wired the relay puck across (parallel) the Off-On switch..
Red Input to the hot side (black wire), Red output wire to the load side of the switch.
Put both the blue wires to 'N' in the box..
So I could use either switch.
Then hung the remote (battery-less) switch control, so my wife could easily reach it..

The Relay puck has a small off-on button that is also the 'Learn' button, for setting up the remote transmitter..

The max 433 MHz range is unknown, but it works fine from anywhere inside the house.
What I didn't like was the lack of Broadlink RM Pro compatibility.
No way to control it with my smart-home stuff..

My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

Last edited by Daox; 10-19-18 at 08:27 AM..
Xringer is offline   Reply With Quote