EcoRenovator - View Single Post

madmike · 12-02-11, 03:52 PM

I am going to try posting pics again, so here goes.

Here is a close up of the brace I made to help support the glazing. There are 2 of them set at 1/3 from both ends.

Here is the installed panel with the 20 watt PV panel.

Here is the charge controller. Hey it works.

This is the battery and fan setup. Hey it works.

12-02-11, 03:52 PM	#42
madmike Helper EcoRenovator Join Date: Sep 2011 Location: Canada Posts: 52 Thanks: 5 Thanked 9 Times in 6 Posts	I am going to try posting pics again, so here goes. Here is a close up of the brace I made to help support the glazing. There are 2 of them set at 1/3 from both ends. Here is the installed panel with the 20 watt PV panel. Here is the charge controller. Hey it works. This is the battery and fan setup. Hey it works. Last edited by madmike; 12-02-11 at 03:55 PM..