EcoRenovator - View Single Post

dh1 · 07-07-11, 10:05 PM

I torn int the cordless mower and this is what I found.
100amp relay with fuse.
Permanent magnet motor that is fan cooled.
LED battery level gauge.
The deck where the motor mounts is all busted up, that's why this one died.
I set the cutting height on the cordless mower to 2 1/2", slid it under the elcetric massey ET2, there's only about 2 1/2" clearance between the top of the motor and the bottom of the tractor. The top of the motor is white plastic that hold the top bearing and the brushes, 1 hit and it's broke. I think the deck has to go out front or behind.
Pictures.

07-07-11, 10:05 PM	#5
dh1 Helper EcoRenovator Join Date: May 2011 Location: Ont. Canada Posts: 99 Thanks: 14 Thanked 11 Times in 9 Posts	I torn int the cordless mower and this is what I found. 100amp relay with fuse. Permanent magnet motor that is fan cooled. LED battery level gauge. The deck where the motor mounts is all busted up, that's why this one died. I set the cutting height on the cordless mower to 2 1/2", slid it under the elcetric massey ET2, there's only about 2 1/2" clearance between the top of the motor and the bottom of the tractor. The top of the motor is white plastic that hold the top bearing and the brushes, 1 hit and it's broke. I think the deck has to go out front or behind. Pictures. Attached Images