View Single Post
Old 09-21-17, 09:51 AM   #1
pablo
Lurking Renovator
 
Join Date: Sep 2017
Location: Canada
Posts: 3
Thanks: 2
Thanked 0 Times in 0 Posts
Default MPPT PV Watts not closely matching Open Voltage

Hi,

I am very new to solar and I'm seeing something on my MPPT's monitoring display which I am not quite understanding.

When I conduct an Open Voltage test of my panels near the MPPT, I see under so-so sun, 32+ VDC/ 6.8 amps Let's say roughly 217.6 watts.

When I immediately connect the PV to the MPPT and I create a draw of more than 62 watts, I'll start to draw from the battery.

I would have thought that I would be able to draw 200+ watts from the PV's before tapping into the batteries.

As a newbie, do I have a fundamental misunderstanding?

Details
  • Two Costco Golf Cart batteries connected in series for 12V/220 AH
  • 100' of 12g stranded cable between the PV's and the MPPT - more on this shortly.
  • A 40 amp controller[1]
  • Two 280 watt solar panels[2]. Due to minimal sun, they're in parallel.

100' run

This location is our cabin. We only use it during the summer time. It points north and is shrouded by trees. Perfect for summer and horrible for solar!

I have measured the DC loss and it is not significant.

References
  1. Controller - EPSolar Tracer 4215BN MPPT Charge Controller - EP Solar - Brands | HES PV
  2. Canadian Solar panels - CS6K-M

ps: as I am new to the forums I am not allowed to use URL links in my posts yet.

pablo is offline   Reply With Quote