EcoRenovator - View Single Post - A7 AirTap install (ASHP hot water heater)

Xringer · 03-18-16, 12:23 PM

Thanks for the tip. I'm going to try some compound. http://www.amazon.com/gp/product/B0002YPAFY

I noticed the tape above the leak, seems to have some rust marking.
A very small amount of water was leaking down from the brass fitting.
So it was leaking from both ends..

Maybe this time, it's going to hold.. Until the tank gets old..

03-18-16, 12:23 PM	#388
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	Thanks for the tip. I'm going to try some compound. http://www.amazon.com/gp/product/B0002YPAFY I noticed the tape above the leak, seems to have some rust marking. A very small amount of water was leaking down from the brass fitting. So it was leaking from both ends.. Maybe this time, it's going to hold.. Until the tank gets old.. Attached Images __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..