Quote:
Originally Posted by pinballlooking
Finishing the romex to the load center was fun it is getting very crowded going up to the load center. I used 12-2 because the next mini split will need that size and it was cheaper to just buy big roll 12-2 then buy both 14-2 and 12-2.
It is a 240 vac unit 27 seer 9,000 btu using a 15 amp breaker.
I have some Liquid-Tite flex for the inside cable. Where do you buy the black wrapping tape?
I bought this “Printed Line Set Tape”
1507-S - Venture Tape 1507-S - Printed Line Set Tape - Silver (2" x 180')
but I am not sure this is the right stuff. |
Did you fish 2 runs of Romex into the load center ? just about as easy as fishing 1 Romex . Leave the spare in the attic , tape or wirenut the ends for safety . At both ends .
I used black electrical tape to wrap the line set . But this may be what is made for that purpose ?
https://www.johnstonesupply.com/stor...ape&sub=search
I see no reason why the tape you bought would not work fine .
God bless
Wyr