EcoRenovator - View Single Post

Servicetech · 12-02-14, 09:38 AM

Changing cap value will not always give good results. If you are running rated HP/amps/voltage the rated cap will normally give best results. I only changed the cap value because I'm running a 230v motor on a 120v circuit.

12-02-14, 09:38 AM	#34
Servicetech Apprentice EcoRenovator Join Date: Nov 2013 Location: Moore Oklahoma Posts: 267 Thanks: 108 Thanked 23 Times in 21 Posts	Changing cap value will not always give good results. If you are running rated HP/amps/voltage the rated cap will normally give best results. I only changed the cap value because I'm running a 230v motor on a 120v circuit.