EcoRenovator - View Single Post

pr0cess0r · 08-24-19, 01:26 PM

I will take some pictures tonigh of the controller and al other parts.

I dont understand the heat rejection you talk about but i used it up to 90f and when you set it up you have to set it so there is a 2 deg diff in and out but its at a very high flow i dont know if you lower the flow if it will have error or what is the max diff in and out.

08-24-19, 01:26 PM	#8
pr0cess0r Lurking Renovator Join Date: May 2018 Location: Quebec Posts: 26 Thanks: 1 Thanked 0 Times in 0 Posts	I will take some pictures tonigh of the controller and al other parts. I dont understand the heat rejection you talk about but i used it up to 90f and when you set it up you have to set it so there is a 2 deg diff in and out but its at a very high flow i dont know if you lower the flow if it will have error or what is the max diff in and out.