Hi; not sure what I am doing here.
Hi; I just charged a Klimeair 12K minisplit with R290. ((Long story how I got to this point)) I ran the first test cycle yesterday with about 2/3rds of the volume by weight installed. The results are nuts. 10 degree change on the compressor and the air handler air flow. Gas line temp 60 psi 72 degrees. liquid line 60 psi 32 degrees. frosting heavily where exposed. I shut it down yesterday and thinking that I screwed something up and so I pumped the system down, pulled another vacuum, leak check and restarted this am. Same results. anyone got any ideas. thanks Owen
|