Made a mistake on the amps in heating mode - it is 9.5 amps (@116V). I knew something was wrong when I read your post. So the kW input is about 1.1 and the COP about 3.2 or so. All in all not too shabby . . .
I have a 7.5 kBTU R22 scroll out of an dehumidifier that would physically fit and the old HP unit has cap tubes for orifices. Maybe a project, but I hear your caution that it might not be worth it.
Thanks!
Steve
ps still struggling to find the leak on the bigger 3 ton GSHP unit; nothing with bubble mix
__________________
consulting on geothermal heating/cooling & rational energy use since 1990
|