EcoRenovator - View Single Post

Xringer · 03-06-11, 11:30 AM

Did a pressure test.. Does not look too good..

http://ecorenovator.org/forum/geothe...html#post12327

Since the One Step Can comes with a cut-off valve, it might be possible to connect the
cut-off to the service port and then connect the little hose, loosely to the cut-off..
Then jab the button to flood the hose with a little R410A, which should force out the air.
Then quickly tighten the connector. (Using gloves of course).

Then, proceed to add some R410A to your system...

03-06-11, 11:30 AM	#9
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	Did a pressure test.. Does not look too good.. http://ecorenovator.org/forum/geothe...html#post12327 Since the One Step Can comes with a cut-off valve, it might be possible to connect the cut-off to the service port and then connect the little hose, loosely to the cut-off.. Then jab the button to flood the hose with a little R410A, which should force out the air. Then quickly tighten the connector. (Using gloves of course). Then, proceed to add some R410A to your system...