EcoRenovator - View Single Post - EcoRider

Daox · 10-05-10, 08:36 AM

I just talked with an engineer at work. We did some quick calculations on key stress and found that even with only the 5/8" or so engagement I'm getting on the second pulley I'll be more than fine transmitting the torque that the motor puts out. So, I'll just add the bolt on the end to make sure everything is held together nice and tight.

10-05-10, 08:36 AM	#209
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	I just talked with an engineer at work. We did some quick calculations on key stress and found that even with only the 5/8" or so engagement I'm getting on the second pulley I'll be more than fine transmitting the torque that the motor puts out. So, I'll just add the bolt on the end to make sure everything is held together nice and tight. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.