EcoRenovator - View Single Post - Where to install your new mini-split??

Xringer · 02-21-13, 07:06 AM

A lot of homes have attached decks in the back.
If it's shaded under there and some kind of rain shield can be installed, that might be a good place..
I don't think the specs for over-head obstructions/blockage/snow roof are critical at all.
If there is over a foot of over-head space and good air flow gap (+18") on the sides,
there shouldn't be a problem with intake air flow..

02-21-13, 07:06 AM	#21
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	A lot of homes have attached decks in the back. If it's shaded under there and some kind of rain shield can be installed, that might be a good place.. I don't think the specs for over-head obstructions/blockage/snow roof are critical at all. If there is over a foot of over-head space and good air flow gap (+18") on the sides, there shouldn't be a problem with intake air flow.. __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. Last edited by Xringer; 02-21-13 at 07:17 AM..