View Single Post
Old 07-20-20, 08:36 PM   #3
WillyP
Lurking Renovator
 
Join Date: Jul 2020
Location: Virginia
Posts: 22
Thanks: 4
Thanked 2 Times in 2 Posts
Default

I made an air heater this way. I found if you drill the hole in the bottom off to one side, then stack them so hole is on the opposite side from the flip top hole, it gives better heat transfer. I'm not sure if that would matter with water. But I am really anxious to see if this works. Keep us posted.
WillyP is offline   Reply With Quote