View Single Post
Old 06-12-19, 11:34 AM   #9
WyrTwister
Master EcoRenovator
 
Join Date: Jun 2013
Location: USA
Posts: 531
Thanks: 6
Thanked 42 Times in 36 Posts
Default

Forgive my ignorance , but is this a heat pump water heater ?

Sounds like there is a crack either in the threads or around that area .

Only thing I can think of ie try brazing up the area with a brass rod & torch . Sounds like you have exhausted the list of common sealants .

Sooner or latter m you will / would have had to replace the tank . So , if you replace it now , you are not going wrong .

If you have a cutting torch or maybe even a saws-all & metal cutting blade , it may be easier getting the tank out of the basement ? Just be very careful up and down the stairs . ( basements are rare around here . )

Best of luck to , my friend , :-)

Wyr
God bless
WyrTwister is offline   Reply With Quote