EcoRenovator - View Single Post

jeff5may · 11-19-14, 05:36 PM

Xringer has graciously answered this question before:

http://ecorenovator.org/forum/5575-post4.html

Many of us have been down this road before. The thread I cited will give you a general idea of the job that lies ahead of you. If you don't have the specialty tools needed for this install, buy, beg or borrow them. They will make the job SO much easier and ensure that the system will be reliable for a much longer time than they are worth. This is one of those cases where the $30 flare nut wrench and the $100 micron gage are worth every penny.

Good luck and please post lots of pics!

11-19-14, 05:36 PM	#9
jeff5may Supreme EcoRenovator Join Date: Jan 2010 Location: elizabethtown, ky, USA Posts: 2,428 Thanks: 431 Thanked 619 Times in 517 Posts	Xringer has graciously answered this question before: http://ecorenovator.org/forum/5575-post4.html Many of us have been down this road before. The thread I cited will give you a general idea of the job that lies ahead of you. If you don't have the specialty tools needed for this install, buy, beg or borrow them. They will make the job SO much easier and ensure that the system will be reliable for a much longer time than they are worth. This is one of those cases where the $30 flare nut wrench and the $100 micron gage are worth every penny. Good luck and please post lots of pics! Last edited by jeff5may; 11-19-14 at 05:51 PM..