View Single Post
Old 09-28-14, 08:57 AM   #24
Servicetech
Apprentice EcoRenovator
 
Servicetech's Avatar
 
Join Date: Nov 2013
Location: Moore Oklahoma
Posts: 267
Thanks: 108
Thanked 23 Times in 21 Posts
Default Same Setup

Quote:
Originally Posted by gtojohn View Post
With Ruud I can get 16 seer with a 14.5 seer outdoor and x-13 indoor blower, and a giant evaporator coil at a very reasonable price point.
I have the 2 ton 14.5SEER condenser set up with matching 2 ton coil. Blower motor isn't an X-13, but a 825RPM single speed instead of the 1075 OEM. Blower wattage 150W vs 350W on low speed with the old motor. I doubt an X-13 is going to deliver 800CFM much cheaper than 150W. Haven't had an electric bill over 1,000KWH since I installed the system in 2012. Since it's a DIY combo, no AHRI rating can be applied.
Attached Images
     

Last edited by Servicetech; 09-28-14 at 09:12 AM.. Reason: Add photos
Servicetech is offline   Reply With Quote