This is how the blade is mounted on a Yardworks cordless mower.
1> is the assembly
2> the motor shaft
3> all the parts,
Spacer>Blade with fan>Square plastic washer>Steel washer>Nut
4> the parts on the motor shaft, minus the blade, fan and plastic washer
The blade, fan, plastic and steel washer all lock together.
The steel washer locks on the motor shaft.
IMO if you can get some kind of a collar locked on the motor shaft in the right spot so it doesn't move, slid up and down, then a thick fender washer, then the blade, then another thick fender washer, and finally the nut it should work.
Whatever you do you want to make sure the blade is not going to come flying off.
|