View Single Post
Old 06-14-18, 07:49 AM   #7
Elcam84
Apprentice EcoRenovator
 
Join Date: Jun 2013
Location: TX
Posts: 275
Thanks: 2
Thanked 31 Times in 24 Posts
Default

What went on mine was the 1" drive pipe nipple on the jet.

My well is just for irrigation and I will see what the output is with the new pump before I redo the watering system. With the jet pump I was planning to get several ibc totes and let the pump fill them and then use another pump to water with. With no back pressure on the well pump it produces more water.

The current water level is 34' and the lowest after a really bad summer was 45'. That was a bad summer where we had over 100 days at or above 100* and much of it was 105*+ with a week at 117* every day with lows of 85*. So the lakes were low etc...

I'm going submersible as the pump cost is pretty much the same and they move allot more water and less hassle and my well is 100' which a jet pump is not very efficient for deeper wells.
Elcam84 is offline   Reply With Quote