EcoRenovator - View Single Post - A7 AirTap install (ASHP hot water heater)

berniebenz · 07-21-12, 06:39 PM

Sure, why not? By design a plate type would be difficult to make without 4 to 500 psi working pressure. If one would fail, the leak would be to the outside, not across the plate.

07-21-12, 06:39 PM	#62
berniebenz Helper EcoRenovator Join Date: Apr 2012 Location: Gardnerville, NV Posts: 66 Thanks: 0 Thanked 3 Times in 3 Posts	Sure, why not? By design a plate type would be difficult to make without 4 to 500 psi working pressure. If one would fail, the leak would be to the outside, not across the plate.