Quote:
Originally Posted by nokiasixteth
Im going to run emt on the roof. Obviously because the fact that it will probably last the longest. But for the underground run. It only seems smart to run it with pvc. Running on the shop to almost the ground a few feet . To a junction box i bought . I dont really like wire nuts . I want to make some type of bus bar deal. Any of you done this . And my wire is 10 guage pv wire to the junction box . Is there any way to transition up to a 8 guage wire from the 10. For the run. Or would it need to be 8 guage all the way or 10.
If any a you done somethin simular maybe ground mount . How did you transition to pvc.
|
You can use a PVC box and drill it for EMT or you can put a threaded end on the PVC and I think you can get an adapter coupling to EMT.