[bennelson]

Version 2 is done.

I don't think the wind is going to blow it away.

I replaced the blanket ends with another (partial) piece of the scrap greenhouse glazing, and some more pink foam.

I sealed up all the ends of the dual-wall polycarbonate with packaging tape, so it will have better insulation value.

The base of the walls are held in place by metal stakes driven into the ground.

The wall end made from the short piece of glazing didn't line up well, do I drilled and ran baling wire through to connect it to the walls.

All seams were caulked with silicone.

(er - gotta go. I have a City Council Meeting to attend to promote Neighborhood Electric Vehicles!!!)