EcoRenovator - View Single Post - A7 AirTap install (ASHP hot water heater)

Xringer · 10-11-13, 06:32 PM

If you can get that old shorted T-stat completely disconnected, it would be good.. It might be melted inside.?.
Just get the wires off it and cap them with twist caps or tape.

If your pump relay is like mine, (R845A) it should be able to handle the 7 to 8 Amps used by the A7.
And a start-up surge up to 44A..

10-11-13, 06:32 PM	#364
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	If you can get that old shorted T-stat completely disconnected, it would be good.. It might be melted inside.?. Just get the wires off it and cap them with twist caps or tape. If your pump relay is like mine, (R845A) it should be able to handle the 7 to 8 Amps used by the A7. And a start-up surge up to 44A.. Attached Images __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. Last edited by Xringer; 10-11-13 at 06:35 PM..