View Single Post
Old 04-29-11, 03:56 PM   #36
RobertSmalls
Journeyman EcoRenovator
 
RobertSmalls's Avatar
 
Join Date: May 2009
Location: Buffalo, NY
Posts: 344
Thanks: 3
Thanked 17 Times in 15 Posts
Default

Quote:
Originally Posted by AC_Hacker View Post
NOTE: data error in post # 26 has been repaired

-AC_Hacker
Aha! An r-value (the correlation coefficient, not the insulation value) like that proves that Passivhaus wall thickness is in fact linear with annual HDD.

Looking at the third plot, I see I fall in with most of the rest of the EcoRenovators, around 6000HDD/yr. This suggests an insulation thickness of 14". Hmm, that's an awful lot.

AC_Hacker, you mentioned that you would do cellulose instead of foam if you could do it over again. Would you recommend cellulose over a CFC-free (e.g. CO2) blown foam as well?

Quote:
Originally Posted by Piwoslaw View Post
"Don't unplug that wall wart or we'll freeze!"
Hah... I've been there.



Viceroy have sent me a pricelist and specification sheet for their houses... they also mentioned that their houses are well sealed, and many customers install a ventilation heat recovery system. I like everything I've seen about them so far, except the fact that new construction is a fair bit more expensive than buying used. But the opportunity to get the house I want, in the right location, sited correctly, is pretty compelling.
RobertSmalls is offline   Reply With Quote