EcoRenovator - View Single Post - Dxgshpwh (ground source heat pump water heater)

MEMPHIS91 · 05-07-15, 05:29 AM

So coolpack is something I will learn over time. I've never been good with computer programs and its quite overwhelming. I did find a few helpful charts, and some threads on here.

30 feet for the water heater HX, and a bore hole of 30 feet deep (60 feet of tubing altogether) with the cap tube at the top of the bore hole looks to be a good balance with everything being 1/4inch. Am I missing anything? I'm ready to buy some copper and get started making the coil. Pictures will start as soon as I do.

05-07-15, 05:29 AM	#21
MEMPHIS91 Journeyman EcoRenovator Join Date: Apr 2015 Location: Oxford, MS USA Posts: 496 Thanks: 69 Thanked 87 Times in 61 Posts	So coolpack is something I will learn over time. I've never been good with computer programs and its quite overwhelming. I did find a few helpful charts, and some threads on here. 30 feet for the water heater HX, and a bore hole of 30 feet deep (60 feet of tubing altogether) with the cap tube at the top of the bore hole looks to be a good balance with everything being 1/4inch. Am I missing anything? I'm ready to buy some copper and get started making the coil. Pictures will start as soon as I do. Last edited by MEMPHIS91; 05-07-15 at 05:52 PM..