EcoRenovator - View Single Post - CFL and LED light bulbs and Garage Door opener Range

Geo NR Gee · 09-14-13, 01:11 PM

One day the garage door opener didn't work when pulling into the driveway. It was only until I was a few feet in front of the door did it open. I contacted the manufacturer of the opener who determined that the logic board was bad and promptly sent me out a new one free of charge. My door opener was 6 years old. Had I bought the logic board, it would have been over $125.

A few days later, I put the new one in and the range was still the same. After another call to the manufacturer, they then determined it was the motor, to which they promptly sent a new one free of charge.

I even went as far as turning off all the breakers to determine if there was a interference issue with something in the house. It wasn't that.

Standing on the ladder and looking at the opener, it dawned on me that I installed the new CFL and then the LED light bulbs in the opener. I took them out and the range came back to like it was when new! I found a 60 watt old style bulb and it works just fine with that.

So, if you are having issues with range on your door opener, this might be your problem.

09-14-13, 01:11 PM	#1
Geo NR Gee Journeyman EcoRenovator Join Date: Jan 2011 Location: Seattle Posts: 326 Thanks: 109 Thanked 23 Times in 18 Posts	CFL and LED light bulbs and Garage Door opener Range One day the garage door opener didn't work when pulling into the driveway. It was only until I was a few feet in front of the door did it open. I contacted the manufacturer of the opener who determined that the logic board was bad and promptly sent me out a new one free of charge. My door opener was 6 years old. Had I bought the logic board, it would have been over $125. A few days later, I put the new one in and the range was still the same. After another call to the manufacturer, they then determined it was the motor, to which they promptly sent a new one free of charge. I even went as far as turning off all the breakers to determine if there was a interference issue with something in the house. It wasn't that. Standing on the ladder and looking at the opener, it dawned on me that I installed the new CFL and then the LED light bulbs in the opener. I took them out and the range came back to like it was when new! I found a 60 watt old style bulb and it works just fine with that. So, if you are having issues with range on your door opener, this might be your problem.