EcoRenovator - View Single Post - Remodeling the office (new floor, ceiling & adding insulation) passive house retrofit

Daox · 08-27-11, 08:26 PM

We started with the actual work today. We started by removing the old trim. Then we moved on to taking out the ceiling. It was quick and easy, just drywall.

Lastly, we pulled up the carpet which was quite a mess. The foam was fairly well stuck to the wood. I assume this is a factor of time and moisture. We scraped it as best we could but there is still a layer of foam here and there. I don't think it'll be a problem since we'll be putting everything over the top of it and it doesn't stick up much at all.

08-27-11, 08:26 PM	#35
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	We started with the actual work today. We started by removing the old trim. Then we moved on to taking out the ceiling. It was quick and easy, just drywall. Lastly, we pulled up the carpet which was quite a mess. The foam was fairly well stuck to the wood. I assume this is a factor of time and moisture. We scraped it as best we could but there is still a layer of foam here and there. I don't think it'll be a problem since we'll be putting everything over the top of it and it doesn't stick up much at all. Attached Images __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.