EcoRenovator - View Single Post - Fixing a leak in the low pressure side A/C aluminum hard line (in a car)

Daox · 09-04-15, 01:07 PM

I ended up hard wiring the A/C relay to make sure it was sending power to the compressor clutch. The clutch still didn't turn on. So, I pulled the plug and tested it. Sure enough, its getting 12V power. Looks like the clutch is bad.

Can you ever service just the clutch, or is the clutch normally replaced with the compressor as one unit?

09-04-15, 01:07 PM	#56
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	I ended up hard wiring the A/C relay to make sure it was sending power to the compressor clutch. The clutch still didn't turn on. So, I pulled the plug and tested it. Sure enough, its getting 12V power. Looks like the clutch is bad. Can you ever service just the clutch, or is the clutch normally replaced with the compressor as one unit? __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.