Alright, I vacuumed the car last night and left the gauge set on it. This morning everything looked good (as good as it can without a micron gauge).
So I took these and hooked them up. I started the engine, turned on the A/C and fan. I closed the hot side, opened the low and introduced the refrigerant.
It seemed to take about half of the can (can is 12oz). Then... nothing. I don't think the compressor kicked in at all, and it certainly isn't cycling. Here is how the pressures are looking now. It appears the pressure have equalized on both sides of the system. I'm guessing I need to get the compressor running at this point. The fuses are good and I swapped the A/C relay with another to make sure that wasn't the problem.
