EcoRenovator - View Single Post - Fixing a leak in the low pressure side A/C aluminum hard line (in a car)

Daox · 09-02-15, 09:19 AM

I got the car again. This time it was to fix some electrical gremlins. While I was at it, I took at look at the A/C again. I took a look at the connection I knew was leaking. I removed the bolt holding it together and noticed a big 'ol crack around the mounting flange. I attempted to remove the line and this inevitably happened (see pic below). I have a new part on order and should have it tonight. Sure hope it holds a vacuum now!

09-02-15, 09:19 AM	#51
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	I got the car again. This time it was to fix some electrical gremlins. While I was at it, I took at look at the A/C again. I took a look at the connection I knew was leaking. I removed the bolt holding it together and noticed a big 'ol crack around the mounting flange. I attempted to remove the line and this inevitably happened (see pic below). I have a new part on order and should have it tonight. Sure hope it holds a vacuum now! Attached Images __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.