Looking awesome!
Quote:
Originally Posted by AC_Hacker
It would have been a very good idea to have a sensor on the 'IN' and 'OUT' of each loop and a sensor on the 'IN' and 'OUT' of the total loop field.
Also it would have been a good idea to have put a vertical string of sensors, say every two feet, on one or more loops.
|
Since you're running your loops in series you wouldn't need more than a send and a return temperature which you could read at the inside unit. If your loops were in parallel having a send and return on each parallel leg would allow you to verify each leg was providing equally.
Having more sensors than that (ie send and return on each well in series and/or every 2 feet) would be cool to have to see HOW it is working, but would be unneeded for anything except additional info. The main send/return temp change (and actual water temperature) is the big thing.
Looking forward to seeing it in action!