Sorry, I didn't see your request.
Heres a photo of the roof.
The area to the left of the wheelbarrow shows the 6 inch tall strap iron and braces that strengthen in the roof. Over that, I pour a load of eps onto the shipping container's roof. After several 6 inch pours and drying times, I cover the eps with a 3/4 inch layer of polymer modified mortar. I consider the mortar to be waterproof but still add a layer of latex paint that soaks into and bonds with the mortar.
I'm pouring every available day in an attempt to complete the roof before the snow starts flying. Only have 20 out of 55 yards to go!
|