Thread: Coal furnace
View Single Post
Old 12-31-17, 11:21 PM   #15
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

I burned coal in my multi-fuel HS Tarm boiler for a while. It was a PITB to haul it home.
At the time, I used my little Subaru 1978 4x4 wagon (The Brat pickup with a station wagon body).
Fold down the back seat and shoveled it in.. No bags of coal around here!

One thing I learned the hard way, is that setting up for an overnight burn, must be done very carefully.
At least with the HS Tarm. I only had one over-heat (3AM) and that was lesson.
Wood is easier to control, the auto air control works great with wood.
I only did a few carloads of coal before I gave it up..
Over the years, I gave up wood too. Been trying to give up oil..
But, this dang global warming has me burning oil again this winter..
Using flow-thur hot-water heat for about a week solid now..
It's 3° now and going to -3° in a few hours..

The -20F Gree is working pretty well so far. I just shut down the Sanyo..
Another -20F Gree might be my next home heating investment..

Happy New Year!!
Rich
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote